3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Camshaft: Service and Repair
Installation of Camshaft & Rocker Arm
Installation procedure:
Note: Lubricate all internal parts with engine oil during reassembly.
1. Lash adjuster.
2. Rocker arm.
3. Camshaft.
a. Turn the crankshaft to bring No.1 cylinder to the top dead center.
b. Check that the rocker arm is installed correctly on the lash adjuster and valve.
c. Install the camshaft while noting the identification mark (stamped on the hexagon section).