3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
>A< Mounting Stopper Installation
Attach the engine mounting bracket so that the arrow mark on the mounting stopper is in the direction as shown in the illustration.
Post-installation Operation:
-
Lower the Engine.
INSPECTION
-
Check each insulator for cracks or damage.
-
Check each bracket for deformation or damage.
ENGINE ROLL STOPPER
REMOVAL
Pre-removal Operation:
-
Condenser Fan Motor Assembly Removal. <Turbo>
-
Left Bank Warm Up Three-Way Catalytic Converter Removal. <Turbo>
Follow removal steps outlined in illustration.
Removal Service Point