3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
6. Apply a small amount of engine oil to the O-ring of the new oil filter.
7. Where the oil filter O-ring touches the oil pan flange, tighten the oil filter to the specified torque using the special tools.
8. Install the drain plug and refill engine oil.
Specified Engine Oil (API classification):
SJ or higher
Total quantity (Includes volume inside oil filter and oil cooler):
<Non-Turbo>4.3 dm3 (4.5 Qts.)
<Turbo> 4.6 dm3 (4.9 Qts.)
9. Race the engine a few times, and check to be sure that no engine oil leaks from the installation section of the oil filter.
