3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
<A> Camshaft Sprocket Removal.
Using a wrench at the hexagonal part of the camshaft (to prevent the crankshaft from turning), loosen the camshaft sprocket bolt.
CAUTION: Do not hold the camshaft sprocket with a tool, or a damaged sprocket could result.
<B> Camshaft Oil Seal Removal.
(1) Cut out a portion in the camshaft oil seal lip.
(2) Cover the tip of a screwdriver with a cloth and apply it to the cutout in the oil seal to pry off the oil seal.
CAUTION: Use care not to damage the camshaft and cylinder head.
INSTALLATION
Installation in reverse order as removal.
Installation Service Points
>A< Camshaft Oil Seal Installation.
(1) Apply a small amount of engine oil to the oil seal lip.
(2) Using the special tool, insert the oil seal.
>B< Camshaft Sprocket Installation.
Using a wrench at the hexagonal part of the camshaft (to prevent the crankshaft from fuming), tighten the camshaft sprocket bolt.
CAUTION: Do not hold the camshaft sprocket with a tool, or a damaged sprocket could result.
