3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Crankshaft Main Bearing Seal: Service and Repair
CRANKSHAFT FRONT OIL SEAL
Removal
Pre-removal Operation:
-
Timing Belt Removal.
-
Crankshaft Position Sensor Removal.
Follow removal steps outlined in illustration.
Removal Service Point
<A> Crankshaft Front Oil Seal Removal.
(1) Make a notch in the oil seal lip section with a knife, etc.
(2) Cover the end of a (-) screwdriver with a rag and insert into the notched section of the oil seal, and pry out the oil seal to remove it.
CAUTION: Be careful not to damage the crankshaft and the oil pump case.
Installation
Installation in reverse order as removal.
Installation Service Point