3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
(1) Using a wrench, hold the camshaft at its hexagon and remove the camshaft sprocket bolt.
CAUTION: Locking the camshaft sprocket with a tool damages the sprocket.
(2) Remove the camshaft sprockets.
<B> Cylinder Head Assembly Removal.
Using the special tool, remove the cylinder head assembly.
INSTALLATION
Installation in reverse order as removal.
Installation Service Points
>A< Cylinder Head Gasket Installation.
(1) Make sure that the gasket has the proper identification mark for the engine.
(2) Lay the cylinder head gasket on the cylinder block with the identification mark at the front top.
Torque Sequence
>B< Cylinder Head Assembly Installation.
(1) Use a scraper to clean the gasket surface of the cylinder head assembly.
CAUTION: Take care that no foreign material gets into the cylinder, coolant passages or oil passages.