3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Low Fuel Lamp/Indicator: Testing and Inspection
1. Connect the fuel gauge unit (thermistor) to battery via test light (12 V-3.4 W). Immerse in water.
CAUTION: After completing this test, wipe the unit dry and install it in the fuel tank.
2. Condition is good if the light goes off when the thermistor is immersed in water and goes on when it is taken out of water.
3. If all checks are correct, the fuel gauge unit is OK. If any check is not correct, replace the fuel gauge unit.