3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
DOHC with air conditioning
GENERATOR DRIVE BELT TENSION ADJUSTMENT
DOHC without air conditioning>
(1) Remove under covers (front L.H., side L.H.).
(2) Loosen the tension pulley fixing nut.
(3) Adjust belt deflection with the adjusting bolt.
(4) Tighten the fixing bolt.
(5) Run the engine one time or more.
(6) Check the belt tension. Readjust, if necessary.
(7) Install under covers.
GENERATOR AND AIR CONDITIONING COMPRESSOR DRIVE BELT DEFLECTION ADJUSTMENT <DOHC with air conditioning>
(1) Use straight handle box wrench to loosen the tension pulley fixing nut.
(2) Adjust belt deflection with the adjusting bolt.
(3) Use straight handle box wrench to tighten the fixing nut.
(4) Run the engine one time or more.
(5) Check the belt deflection. Readjust, if necessary.