mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Specifications|Page 2515
Page 1
background image

Malfunction Indicator Lamp: Testing and Inspection

(1) Check that when the ignition switch is turned on, the lamp illuminates for about 5 seconds and then goes out.
(2) If the lamp does not illuminate, check for open circuit in harness, blown fuse and blown bulb.

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Specifications|Page 2515