3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Throttle Position Sensor: Testing and Inspection
OPERATION
-
The throttle position sensor converts the throttle position opening into a voltage and inputs it to the engine control module, which then controls the
fuel injection based on the input signal.
-
The 5 V power in the engine control module is supplied to the throttle position sensor. Through the resistor in the sensor, it is grounded in the
engine control module.
-
As the throttle valve shaft rotates from the idle position to wide open position, the resistance between the variable resistor terminal of the throttle
position sensor and the ground terminal increases. As a result, the voltage at the throttle position sensor variable resistance terminal also increases.
TROUBLESHOOTING HINTS
Hint 1: The throttle position sensor signal is more important in the control of automatic transaxle than in the engine control. Shifting shock and
other troubles will be caused if this sensor is faulty.
Hint 2: If the output voltage of the throttle position sensor is out of specification, adjust the sensor and check the voltage again. If there is an
evidence of disturbed fixed SAS setting, adjust the fixed SAS.