3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
>A< Throttle Body Gasket Installation.
Install with the gasket protrusion positioned as shown.
CAUTION: If installed in an incorrect direction, idling failure or other problems may occur.
Post-installation Operation:
-
Accelerator Cable Adjustment.
INSPECTION
Check the following points. Replace the part if a problem is found.
(1) Check intake manifold plenum for defect or cracks. Replace if defective or cracked.
(2) Check load (negative pressure) of drain port. Clean if required.