3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
OPERATION
-
The camshaft position sensor senses the top dead center on compression stroke of the No.1 converts it into a pulse signal and inputs it to the
engine control module, which then controls the fuel injection sequence, etc. based on the input signal.
-
Power to the camshaft position sensor is supplied from the MFI relay and is grounded to the body. The camshaft position sensor generates a pulse
signal as it repeatedly connects and disconnects between 5 V voltage supplied from the engine control module and ground.
TROUBLESHOOTING HINTS
Hint 1: If the camshaft position sensor does not function correctly, correct sequential injection is not made so that the engine may stall, run
irregularly at idle or fail to accelerate normally.
Hint 2: If the sensor outputs a pulse signal when the ignition switch is turned ON (with the engine not running), a faulty camshaft position sensor
or engine control module is suspected.
