3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Alternator Brush: Testing and Inspection
1. Measure the length of the brush protrusion shown in the illustration, and replace the brush if the measured value is below the limit value.
Limit: 2.0 mm (0.8 in) or below
Brush Replacement
2. The brush can be removed if the solder of the brush lead wire is removed.
3. When installing a new brush, push the brush in the brush holder as shown in the illustration, and solder the lead wire.