3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
<F> Ball Bearing/Oil Seal Removal (20 & 21)
Using a socket, remove the oil seal and the ball bearing from the valve housing simultaneously.
<G> Circlip Removal (22)
1. Turn the rack stopper clockwise until the end of the circlip comes out of the slot in the rack housing.
2. Turn the rack stopper counterclockwise to remove the circlip.
CAUTION: Note that if the rack stopper is first turned counterclockwise, the circlip will get caught in the slot in the housing and the rack
stopper will not turn.
<H> Rack Removal (25)
Pull out the rack slowly.
At this time also take out the rack stopper and the rack bushing simultaneously.
<I> Oil Seal Removal (27)
Partially bend oil seal and remove from rack bushing.
CAUTION: Do not damage oil seal press fitting surface.