3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
<A> Steering Wheel Removal (2)
CAUTION: Do not hammer on the steering wheel to remove it; doing so may damage the collapsible mechanism.
INSTALLATION
Installation in reverse order as removal.
Installation Service Points
>A< Steering wheel installation (2)
Align the mating marks of the clock spring and, after turning the front wheels to the straight-ahead position, install the clock springs to the column
switch.
Mating Mark Alignment
Turn the clock spring clockwise fully, and then turn back it approximately 3 4/5 turns counterclockwise to align the mating marks.
CAUTION: If the clock springs mating marks are not properly aligned, the steering wheel may not rotate completely during a turn, or the flat cable
within the clock spring may be severed, obstructing normal operation of the SRS and possibly leading to serious injury to the vehicle's driver.
Post-installation Operation
-
Check steering wheel position with wheels straight ahead.