3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Use the special tool to remove and press in bushings A and B.
Press in bushings A and B so that the arrows on their bottom surfaces may be directed in the crosswise direction (except those on No. 1
crossmember of FWD vehicles).
CAUTION Shifting of the arrow in the direction of rotation shall be within ±5° of the crosswise direction.
Press in bushings A and B so that the projecting amount of the inner sleeve agrees with the standard value.
CAUTION: When pressing in, apply a solution of soap and water to the sliding part of the bushings, and then press them in without stopping one
after the other.
If there is a pause during the pressing operation, the frictional resistance will prevent installation.
INSTALLATION
Installation in reverse order as removal.
Post-installation Operation:
-
Under Cover Installation
-
Power Steering Fluid Air Bleeding
-
Front Wheel Alignment Adjustment
-
Transfer Oil Supplying (AWD Only)