3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
<B> Rear Axle Shaft Removal (6)
With the special tool, remove the rear axle shaft.
<C> Self-Locking Nut (upper arm) / Self-Locking Nut (lower arm) Removal (12 & 13).
CAUTION: Support special tool MB991113 with a cord, etc. to prevent it from coming off.
NOTE: Only loosen the nut, do not remove it from the ball joint.
INSTALLATION
Installation in reverse order as removal.
Post-installlation Operation
1. Check wheel alignment.
2. Check parking brake lever stroke.
3. Check rear brake disc run-out.
INSPECTION
-
Check trailing arm for cracks and deformation.
-
Check bushing for cracks, deterioration and wear.
Trailing Arm Bushing Replacement
Use the special tool to remove and press-fit the bushing.
Connecting Rod Replacement