3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
NOTE: Since the check valve is fit to the vacuum hose C, replace the check valve as an assembly unit together with the vacuum hose C if the
check valve is defective.
Installation Service Points
>A< Vacuum Hose E / Vacuum Hose D / Vacuum Hose C With Check Valve / Vacuum Hose B / Vacuum Hose A Installation
If a hose is connected to a pipe with a stepped part, insert the hose up to the stepped part.
If it is connected to a pipe without any stepped part, insert the hose until the insertion amount reaches the standard value.
Standard value: 20-25 mm (0.8-1.0 inch)
>B< Air Cleaner Cover, Air Intake Hose A Installation
Align slots indicated by arrows in air intake hose A with markings on air intake hoses B and C; then, insert hoses B and C all the way into air
intake hose A.
Insert air intake hoses B and C all the way up to the roots on the turbo charger end.
>C< Air Hose A Installation
Connect the air hoses ensuring that alignment marks are aligned with projections.