3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
2. Use the special too[ provided as a cover to prevent the entry of foreign objects into the transfer.
<B> Spacer Removal
The number of spacers necessary may differ from one location to another (front, rear, right, left). Record the number of spacers used to ensure
correct installation.
Installation Service Points
>A< Propeller Shaft Installation
1. CAUTION: Be cautious to avoid damage to the oil seal lip of the transfer.
2. Install the propeller shaft to the companion flange with the mating marks properly aligned.
CAUTION: Tighten installation bolts after removing oil and grease from threads to prevent them from loosening due to lubrication.
>B< Insulator Installation
Install spacers and insulators as indicated in the illustration.
CAUTION: When installing the center bearing, assemble the same spacers as removed from it (or new spacers of equal thickness).
INSPECTION