3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
6. Apply specified grease to the Lobro joint assembly.
Specified grease: Repair kit grease [45-55 grams (1.59-1.94 oz.)]
7. Apply quick fix adhesive at three locations illustrated to prevent displacement of the rubber packing and fix it to the Lobro joint assembly
temporarily.
Specified adhesive: 3M ATD Part No. 8155 or equivalent
8. Lining up the mating marks on the Lobro joint assembly and the center propeller shaft and applying the socket to the inner race of the Lobro
joint assembly, install the Lobro joint assembly to the center propeller shaft.
9. Using the center propeller shaft bolt, align the bolt holes of the Lobro joint boot and the Lobro joint assembly and install the Lobro joint boot
to the Lobro joint assembly.
