Cordia L4-2.0L SOHC (1984)
6.
Warm up the engine to normal operating temperature. Turn off all lights and accessories, engine cooling fan OFF, and transmission in neutral or
park with parking brake applied. If the car has power steering, be sure the front wheels are straight ahead to avoid any load on the power steering
pump.
7.
Set ignition timing to 5~ - 7~ BTDC at idle.
8.
Set idle speed to specifications shown at right.
9.
Mark the TPS with blue or black ink or paint.
10.
Install the air cleaner.
IDLE SPEED SPECIFICATTONS - RPM
WARRANTY CLAIM SUBMITTAL
A Warranty Claim (MWC) should be submitted using the standard Warranty Claim form (MSSP-003D-00). The following instructions must be followed
to ensure prompt processing and reimbursement.
^
Submit one claim form for each vehicle.
^
Change the top part of each claim form. "White-out" the pre-printed "W" and insert the letter "X" in the same space (see claim example below):
^
Use Labor Operation Code 14-99-10-01.
^
Use Labor Operation Time of 0.5 hr.
^
Use Failure Code 99.