Cordia L4-2.0L SOHC (1984)
Idle Speed: Adjustments
Idle - Up, Adjust
Models With Air Conditioning
IDLE-UP SPECIFICATION
Manual Transmission ........................................................................................................................................................ Throttle opener setting = 750 rpm
1.
Start and idle engine until engine coolant reaches normal operating temperature, then ensure all lights and accessories are in ``Off'' position.
2.
Place transmission or transaxle selector lever in Neutral, then disconnect electric cooling fan at radiator.
3.
Apply parking brake, then on models with power steering, set wheels in straight ahead position.
4.
Adjust curb idle speed to specifications, if necessary, then turn air conditioning switch ``On.''
5.
Adjust engine speed to specification using the throttle opener setting screw (idle-up adjusting screw).
6.
Connect electric cooling fan at radiator, then cycle air conditioner switch ``On'' and ``Off'' to ensure proper operation of throttle opener.
Adjustment Procedure
Idle-up adjustment should be made after each curb idle adjustment.
Models Without Air Conditioning
IDLE-UP SPECIFICATION
Manual Transmission ........................................................................................................................................................ Throttle opener setting = 750 rpm
1.
Adjust curb idle speed to specifications, if necessary.
2.
Disconnect electrical connector from idle-up solenoid valve or throttle opener control solenoid valve and activate valve using a suitable jumper
wire.
3.
Activate throttle opener using intake manifold vacuum.
4.
Open throttle slightly until engine speed reaches approximately 2,000 RPM, then slowly close the throttle.
5.
Adjust engine speed to specifications, using throttle opener adjuster screw.
6.
Repeat step 4 and recheck engine speed.
7.
Remove jumper wire and reconnect solenoid valve electrical connector.
