Diamante V6-2972cc 3.0L SOHC (1992)
1.
Press the "PWR" button to turn the phone on.
2.
From the keypad, key in the telephone number.
3.
Press the "STO" key.
4.
From the keypad, key in a two digit memory location (from 01 to 99).
PLACING AN OFTEN-USED NUMBER CALL
1.
Press the "PWR" key
2.
Press the "RCL" key.
3.
Enter the required memory location (01 to 99). The telephone number stored at that location will be displayed.
4.
Press the "SEND" key to place the call.
PLACING A CALL
1.
Press the "PWR" button to turn the phone on.
2.
Key in the desired telephone number. Each digit pressed will appear on the display (up to 14 digits will be displayed).
3.
Press the "SEND" key. The "IN USE" indicator will appear on the display. The dialed telephone number will disappear, and the talk timer will
appear. Normal network tones will be heard from the speaker.
^
-
If a busy tone is heard, press the "END" key for more than 1/2 second.
^
-
If you entered an incorrect digit, press the "CLR" key to clear the last entered digit. To clear the entire number, hold down the "CLR" key.
^
-
An intercept (siren) signal indicates that a mistake was made by the user. Retry.
4.
To end the call, press the "END" key.
