Diamante V6-2972cc 3.0L SOHC (1992)
3. VALVE STEM SEAL REMOVAL
(1) Do not reuse removed valve stem seals
INSTALLATION SERVICE POINTS
1. VALVE STEM SEAL INSTALLATION
1. Using the special tool, install a new stem seal to the valve guide.
Note: Do not reuse removed valve stem seals. Always use the special tool to install the valve stem seal. Improperly installed valve stem seal may
cause oil down.
2. VALVE SPRING INSTALLATION
1. Direct the valve spring end with identification color toward the spring retainer.
3. RETAINER LOCK INSTALLATION
1. Using the special tool, compress the valve spring and insert the retainer lock into position.