Diamante V6-2972cc 3.0L SOHC (1992)
Fig. 4 Rear Toe-In Adjustment - 4 Wheel Steering
4-WHEEL STEERING
Adjust rear toe-in by turning power cylinder tie rod screw an equal amount on both sides. Fig. 4.
Front Toe-In
Fig. 1 Front Toe-In Adjustment
1.
Adjust toe-in by loosening clips and turning left and right tie rod turnbuckles equally in opposite directions. Refer to Fig. 1.
2.
To increase toe-out, turn left turnbuckle toward front of vehicle and right turnbuckle toward rear of vehicle. To increase toe-in, turn turnbuckles in
other direction.
3.
Amount of toe-in adjustment is .24 inch for each half turn of left and right tie rods.