Diamante V6-2972cc 3.0L SOHC (1992)
Oxygen Sensor: Service and Repair
Oxygen Sensor Location
Oxygen sensor, located in the exhaust header pipe before the catalytic converter.
Oxygen Sensor Installation And Removal Tool
REMOVAL
1.
Disconnect the harness terminal.
2.
Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
INSTALLATION:
1.
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2.
Install the sensor and torque to 33 ft-lbs (45 Nm.).
3.
Apply a thin coating of dielectric compound to the connector.
4.
Connect harness terminal.
