mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Engine Controls - Never Use a Test Light To Check an ECM|Page 2672 > < Engine Controls - Never Use a Test Light To Check an ECM|Page 2670

Diamante V6-2972cc 3.0L SOHC (1992)

Page 1
background image

Engine Control Module: Testing and Inspection

ECM Grounds

Engine Control Module Connector--For Pin Applications See Components

GROUND CIRCUIT TEST 

1.

Using an ohm meter, check for continuity between ground and ECM harness terminals 13 and 26.

Continuity Should Exist 

If continuity does not exist, the harness will need to be repaired or replaced. Once repairs have been completed, road test the vehicle to confirm
that the repair has corrected the problem. 

Engine Controls - Never Use a Test Light To Check an ECM|Page 2672 > < Engine Controls - Never Use a Test Light To Check an ECM|Page 2670