Diamante V6-2972cc 3.0L SOHC (1992)
Figure 4
1. Verify that a yellow striped vacuum hose is connected to vacuum nipple "A" (Figure 4).
NOTE:
It may be necessary to twist the vacuum hose to see the yellow stripes.
2. Remove and discard the existing Yellow striped vacuum hose.
Figure 5
Figure 6
3. Install the new EGR vacuum hose assembly on the vacuum nipples with the white band placed TOWARD the throttle body. Figure 5 shows an
installed EGR hose assembly on vehicles with TCL. Figure 6 shows an installed EGR hose assembly on vehicles not equipped with TCL.