Diamante V6-2972cc 30L SOHC (1992) Steering and Suspension Alignment TSB
4.
Reinstall the pressure hose and nut.
Make sure the indentation of the hose connector contacts the pump guide bracket. Tighten the nut 24 N-m (17 ft.lbs.).
5.
Bleed the system. Refer to pages 37A-18 and 19 of the service manual for bleeding instructions.
CAUTION:
Failure to bleed all air from the system will lead to abnormal system noise (hammering) and possible damage to power steering components.
Procedure # 5
Procedure # 5: Replacing the EPS or NPS Gear Box Valve
1.
Drain the power steering fluid. Refer to page 37A-18 of the service manual for draining instructions.
2.
Remove the front exhaust pipe. Refer to page 15-6 of the service manual for a diagram of the front exhaust pipe removal.
3.
Remove the power steering gear box assembly. Refer to the diagram for parts removal sequence.
CAUTION:
Before removing the steering gear box assembly, center the front wheels and remove the ignition key from the vehicle. Failure to do so may