Diamante V6-2972cc 3.0L SOHC (1992)
For convenience, use the flow chart to determine the sequence of procedures to perform. This chart applies to all conditions of steering drift.
STEERING DRIFT CORRECTION SEQUENCE
Procedure # 1
Procedure # 1: Checking/Adjusting Wheel Alignment and Tire Inflation Pressures
1.
After the tires have had a while to cool (they should NOT be warm to the touch), check and adjust the inflation pressures.
Correct tire inflation pressures are:
Front Tires - 32 psi.
Rear Tires - 26 psi.
2.
Check, and if necessary, adjust the wheel alignment using a 4-wheel alignment system.
If alignment angles for non-adjustable suspension components are not within specification, inspect the components for damage. Replace any
components found to be bent or otherwise damaged. Re-check the wheel alignment.
1992 Diamante Wheel Alignment Specifications
