Diamante V6-3.5L SOHC (2003)
Switch Diagnosis Mode
This is a mode in which the switch input signals which are input into each ECU on the Simplified Wiring System (SWS) can be checked - if the input
signal for a switch is normal when that switch is operated in this mode, the high beam indicator lamp flashes and a buzzer sounds.
Returning to Normal Mode
1. Turn the ignition switch OFF.
2. Remove the special tool from the data link connector. The mode will now return to Normal.
Diagnostic Trouble Code Descriptions
For information regarding B, C, P, U and Manufacturer Code Descriptions - See: Testing and Inspection/Diagnostic Trouble Code Descriptions
Diagnostic Trouble Code Tests and Associated Procedures
For information regarding diagnosis of all B, C, P, U and Manufacturer Codes - See: Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures