Diamante ES Sedan V6-3.5L SOHC (1997)
Brake Bleeding: Service and Repair
1. Start the engine and bleed the air in the sequence shown in the figure.
2. Pump the brake pedal 3 - 4 times. With the pedal depressed have a helper momentarily open the first bleeder screw. Do not release the brake pedal
until the bleeder screw is tightened.
3. Repeat 2 - 3 times and move on to the next bleeder screw in the illustration.
4. Repeat until all air is purged from the hydraulic system.