Diamante ES Sedan V6-3.5L SOHC (1997)
Ignition Switch: Service and Repair
Ignition Switch - Removal And Installation
Removal
To remove follow the steps listed in the image and note the following :
Steering Lock Cylinder Removal
Step 3: Steering Lock Cylinder Removal
1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a cross-tip (+) screwdriver (small) or a similar tool, push the lock pin of the steering lock cylinder inward and then pull the steering lock
cylinder toward you.
Installation
To install reverse the steps listed in the image.