Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Radiator: Service and Repair
1. Drain engine coolant, then remove drain plug and radiator cap.
2. Remove overflow hose and reserve tank, then the upper and lower radiator hoses.
3. Disconnect ATF cooler hoses from radiator, then plug and cover hoses and nipples.
4. Disconnect condenser and radiator fan motor connections, then remove upper insulator and radiator.
5. Remove condenser fan motor assembly.
6. Remove thermo sensor connector.
7. Remove radiator fan motor assembly.
8. Remove condenser and radiator fan thermo sensors.
9. Remove lower insulator and fan, then resistor, fan motor and shroud.
10. Reverse procedure to install.
