Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Fig. 13 Throttle Body Gaskets
a. Install throttle body gasket as shown in Fig. 13.
b. Rotate engine to position No. 1 cylinder at top dead center.
c. Line up match marks on crank angle sensor, then install into engine.
d. Lubricate fuel pressure regulator and fuel injector O-rings with clean engine oil for easy installation.
Fig. 14 Injector Retaining Clip Installation
e. Install injector into delivery pipe installing clip as shown, Fig. 14.