Diamante Sedan V6-2972cc 3.0L DOHC (1993)
3. Removal of crankshaft pulley.
Using special tools, remove the crankshaft pulley from the crankshaft.
CAUTION:
-
Use only the specified special tools, or a damaged pulley damper could result.
9. Removal of engine support bracket.
Remove the engine support bracket in the numbered sequence shown In the illustration. Spraying lubricant, slowly remove the bolt (reamer bolt)
indicated by the arrow.
CAUTION:
-
Keep in mind that the reamer bolt is sometimes heat seized on the engine support bracket.
11. Removal of timing belt.
(a) Align the timing marks.
(b) Loosen the center bolt on the tensioner pulley to remove the timing belt.
