Diamante Sedan V6-2972cc 3.0L DOHC (1993)
(b) Align the timing mark of the rear bank side camshaft sprocket.
(c) Align the timing mark of the front bank side camshaft sprocket and support it not to rotate with a closed wrench.
CAUTION:
-
The camshaft sprocket will easily turn because of the valve spring force, so be careful not to insert your fingers, etc.
-
If the sprocket on one side of the front bank is turned one full revolution while the sprocket timing marks on the opposite side of the front bank
are aligned, the intake and exhaust valves may cause interference.
(d) Check that the camshaft sprocket timing mark of the front bank side is aligned and clamp timing belt with double clips.
CAUTION:
-
If the timing belt is reused, install so that the arrow marked on it at the time of removal is pointing in the clockwise direction
(e) Set the timing belt onto the water pump pulley.
(f) Check that the camshaft sprocket timing mark of the rear bank side is aligned and clamp the timing belt with double clips.
(g) Set the timing belt onto the idler pulley.