Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Oxygen Sensor: Service and Repair
Oxygen Sensor Location
Oxygen Sensor Installation And Removal Tool
Removal
1. Disconnect the harness terminal.
2. Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
Installation:
1. Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2. Install the sensor and torque to 33 ft lb (45 Nm).
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.