Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Camshaft Position Sensor: Description and Operation
Camshaft Position Sensor
Location
Camshaft (TDC) Sensor is located on the rear of left side, cylinder head.
Purpose
The Electronic Control Module (ECM) uses this input to determine engine speed and TDC, and adjusts ignition timing, fuel injection, and idle
speed accordingly.
Operation
Power is supplied to the camshaft position sensor from the MFI relay and is grounded to the body.
The sensor generates a pulse signal, as it repeatedly connects and disconnects between 5V, supplied by the ECM, and ground.
