Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Ignition Cable: Testing and Inspection
Ignition Wire Inspection
1. Visually inspect the ignition wires for:
-
Insulation or boots swelling or breaking down (due to fuel, oil or grease).
-
Terminal ends corroding, cracked or loose.
Ignition Wire Resistance Test
2. Using an ohmmeter, measure spark plug wire resistance between ends.
Acceptable Resistance:
Approximately 7 K - 10 K ohms per foot, (not to exceed 30 K ohms per wire).
-
Replace the wire if it fails the above test.