Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Clockspring Assembly / Spiral Cable: Testing and Inspection
1. Inspect clock spring as follows:
a. Check connectors and protective tube for damage and terminals for deformities.
b. Visually check case and gears for damage.
Fig. 18 Checking Clock Spring Continuity. Diamante
c. Check for continuity between the No. 1 connector of the clock spring and connectors Nos. 3, 4, 5 and 6. Refer to chart.
d. Connect the No. 2 connector (airbag side) and No. 7 connector of the clock spring to connector Nos. 4 and 3, respectively, of the SRS check
harness. When connecting SRS check harness connector No. 4, align its white paint with hollow portion of the No. 2 connector of the
clock spring.
e. Ensure that continuity between terminals 1 and 21, between terminals 2 and 22 of the SRS check harness connector No. 5, using a digital
multi-meter, is less than .4 ohms.
f.
If in above check, even one abnormal point is discovered, replace clock spring.
