Diamante Sedan V6-3.5L SOHC (1999)
8. Start the engine.
9. Operate the air conditioner and set at the lowest temperature (MAX. COOL).
10. Fix the engine speed at 1,500 rpm.
11. Tighten the handle of the adaptor valve (valve open), and replenish refrigerant checking the quantity through the sight glass.
CAUTION: If the service can is inverted, liquid refrigerant may be draw into the compressor damaging it by liquid compression. Keep the
service can upright to ensure that refrigerant is charged in gas state.
12. After replenishing is completed, turn the handle of the adaptor valve all the way back (valve close), and remove the quick joint.
NOTE: If any refrigerant is remaining in the service can, close the adapter valve and save the refrigerant for another vehicle. Do not release into
the atmosphere.
METHOD BY USING REFRIGERANT RECOVERY AND RECYCLING UNIT
Using the refrigerant recovery and recycling unit, refill the refrigerant.
NOTE: Refer to that Refrigerant Recovery and Recycling Unit Instruction Manual for operation of the unit
DISCHARGING SYSTEM
Use the refrigerant recovery unit to discharge refrigerant gas from the system.
NOTE: Refer to that Refrigerant Recovery and Recycling Unit Instruction Manual for operation of the unit
