Diamante Sedan V6-3.5L SOHC (1999)
Spark Plug: Testing and Inspection
Spark Plug Check and Cleaning
1. Remove the engine cover and intake manifold plenum.
2. Remove the spark plug cables.
CAUTION: When pulling off the spark plug cable from the plug always hold the cable cap, not the cable.
3. Remove the spark plugs.
4. Check for a burned out electrode or damaged insulator. Check for even burning.
5. Remove carbon deposits with a plug cleaner. Remove sand from the plug threads with compressed air.
CAUTION: Cleaning a platinum spark plug may damage the platinum tip. If carbon deposits must be removed use a plug cleaner and complete
cleaning within 20 seconds. Do not use a wire brush.
6. Use a plug gap gauge to check that the plug gap is within the standard value range. Replace the spark plug if the limit is exceeded.
Standard value: 1.0 - 1.1 mm (0.039 - 0.043 in.)
7. Clean the engine plug holes.
CAUTION: Use care not to allow foreign matter in cylinders.
8. Install the spark plugs.