Diamante Sedan V6-3.5L SOHC (1999)
Step 2: Erases data in the ECU.
Step 3: Writes new data in the ECU.
Step 4: Verifies the new data is transferred.
Step 5: Erases diagnosis and back-up memory.
10.
The new ECU part number and ROM-ID display.
You must turn the ignition switch to OFF to complete the reprogramming process.
11.
Start the engine and disconnect the MUT-III.
MANUAL REPROGRAMMING
1.
In the main menu, select "Load RPG file". Then press ENTER.
2.
Select the reprogramming database by using the down arrow. Then press ENTER.