Diamante Sedan V6-3.5L SOHC (1999)
Transmission Control System Relay: Testing and Inspection
A/T CONTROL RELAY CHECK
1. Remove the A/T control relay.
2. Use jumper wires to connect the A/T control relay terminal (2) to the battery (-) terminal and terminal 4 to the battery (+) terminal.
3. Check the continuity between the terminal (1) terminal (3) of the A/T control relay when the jumper As wires are connected to and disconnected
from the battery.
4. If there is a problem, replace the A/T control relay.
