Diamante Sedan V6-3.5L SOHC (1999)
Air Bag(s) Arming and Disarming: Technician Safety Information
WARNING:
1. In order to avoid injury to yourself or others from accidental deployment of the air bag or pretensioner Seatbelts during servicing, read and
carefully follow all the precautions and procedures described.
2. Do not use any electrical test equipment on or near SRS Airbag components, except those specified.
3. Never Attempt to Repair the Following Components:
-
SRS air bag control unit (SRS-ECU)
-
Clock Spring
-
Air Bag Module
-
Pretensioner Seatbelts
If any of these components are diagnosed as faulty, they should only be replaced, in accordance with the INDIVIDUAL COMPONENT SERVICE
procedures.
4. After disconnecting the battery cable, wait 60 seconds or more before proceeding with the following work. The SRS system is designed to retain
enough voltage to deploy the air bag for a short time even after the battery has been disconnected, so serious injury may result from unintended air
bag deployment if work is done on the SRS system immediately after the battery cables are disconnected.
