Diamante Sedan V6-3.5L SOHC (1999)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
DISASSEMBLY AND REASSEMBLY
Service Points Of Disassembly
<A> Removal Of Hub From Knuckle
1. Attach the special tools to the knuckle and hub.
2. Secure the knuckle in a vice.
3. Tighten the nut of the special tool to remove the hub from the knuckle.
CAUTION: Always use the special tool to remove the hub. Never strike the hub or knuckle with a hammer to separate them as the bearing
will be damaged.
<B> Wheel Bearing
1. Crush the oil seal in two places so that the tabs of the special tool can be engaged on the wheel bearing inner race.