mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Steering Rack - Overhaul Procedure Revision|Page 3542 > < Key Reminder Switch|Testing and Inspection
Page 1
background image

Steering Gear: Technical Service Bulletins
Steering Rack - Overhaul Procedure Revision

No: TSB-01-37A-002
DATE: July, 2001
MODEL: 1999-2001 Diamante

SUBJECT:
STEERING RACK OVERHAUL PROCEDURES - SERVICE MANUAL REVISION

[TSB Revision TSB-01-37A-002]

This bulletin contains new, revised steering rack overhaul procedures. Please replace those in each service manual with the instructions as shown in this
bulletin.

Write the TSB revision number of this bulletin in the "TSB Revision" box at the bottom of the affected service manual page.

BACKGROUND INFORMATION

The steering rack overhaul procedures are changed because of revised construction and configuration of the internal parts. The chart shown lists part
numbers for some internal parts. The steering rack was revised beginning with February 1999 production. A update kit, MR921301 is available to update
steering racks built before February 1999 to the newer specification.

NOTE:

If the MR921301 update kit is used, all parts listed in the "Up to February 1999 Build" should be discarded.

AFFECTED VEHICLES
1999-2001 Diamante

AFFECTED SERVICE MANUALS
1999, 2000, & 2001 Diamante Service Manuals, Volume 2, Pages 37A-18 through 37A-24

SERVICE MANUAL REVISION

Steering Rack - Overhaul Procedure Revision|Page 3542 > < Key Reminder Switch|Testing and Inspection