Diamante Sedan V6-3.5L SOHC (1999)
2. While holding the piston rod, remove the self-locking nut.
CAUTION: An air tool should not be used for the removal of the special tool bolt.
Reassembly Service Points
>A< Coil Spring Installation
1. Use the special tools (MB991237 and MB991239) to compress the coil spring and install it to the shock absorber seat.
2. Align the edge of the coil spring to the stepped part of the shock absorber spring seat.
CAUTION: An air tool should not be used for the tightening of the special tool bolt.
>B< Bracket Installation
Install the bracket as shown in the illustration.
>C< Self-Locking Nut Installation
1. Temporarily tighten the self-locking nut.
2. Remove the special tools (MB991237, MB991239), and tighten the self-locking nut at the specified torque.
CAUTION: Do not use an air tool.