Eclipse L4-1795cc 1.8L SOHC (1990)
(2) Holding the timing belt "B" tensioner up with your finger in the direction of the arrow, place pressure on the timing belt so that the tension side
of the belt is taut. Now tighten the bolt to fix the tensioner.
Caution: When tightening the bolt, ensure that the tensioner pulley shaft does not rotate with the bolt. Allowing it to rotate with the bolt can cause
excessive tension on the belt.
(3) To ensure that the tension is correct, depress the belt (point A) with a finger. If not, adjust.
Standard value: 5-7 mm (0.20-0.28 in.).
26. Installation of flange.
Install the flange in correct direction as shown.
22. Installation of tensioner spring /21, tensioner spacer /2O, timing belt tensioner.
(1) Install the tensioner spring, tensioner spacer and timing belt tensioner.
(2) Place the upper end of the tensioner spring against the water pump body.
